The impact electric wrench is mainly used to initially tighten the bolt. Its use is very simple, that is, just aim at the bolt and pull the power switch. The electric torsional shear wrench is mainly used to finally tighten the torsional shear type high-strength bolt. Its use is to pull the power switch against the bolt until the Torx head of the torsional shear type high-strength bolt is broken. The electric constant torque wrench can be used for initial tightening and final tightening. Its use is to adjust the torque first, and then tighten the bolts. The electric angle wrench mainly belongs to a kind of constant torque wrench. Its use is to adjust the rotation first, and then tighten the bolts. The electric angle wrench is an electric wrench specially used to fasten the bolts at the included angle of the steel frame. Its use principle is the same as that of the electric torsion shear wrench.

扭轉剪切扳手主要扭剪型高強度螺栓,它的目的是扭剪型高強度螺栓梅花頭打斷工作目標扳手頭螺栓頭,把開關可以開始工作,幾秒鐘后,螺栓梅花頭將被打破,然后拿出一個扳手將梅花頭彈出扣動扳機,或完成工作。

The torsional shear wrench is mainly used for torsional shear high-strength bolts. Its purpose is to break the working target wrench head bolt head with the Torx head of torsional shear high-strength bolts. The switch can start to work. After a few seconds, the bolt Torx head will be broken, and then take out a wrench to pop the Torx head to pull the trigger, or complete the work.

電動扳手的影響主要是螺栓開始時,很容易使用和旨在螺栓拉主電源開關線電氣zui終扭轉剪切扳手扭剪型高強度螺栓,螺栓把電源開關的使用,直到扭剪型高強度螺栓梅花頭中斷。電動恒轉矩扳手可能zui終緊緊初,它的使用是先調整轉矩,然后螺栓扳手主要電氣角落也屬于一種恒轉矩扳手,它的使用是先調整旋轉程度,然后擰緊螺絲。電動角向扳手是一種特殊的電扳手，專門固定在鋼架角的螺栓。它和扭剪電動扳手一樣。

The impact of the electric wrench is mainly that the bolt is easy to use at the beginning, and the bolt is designed to pull the main power switch line. The electric Zui final torsion shear wrench is used to twist shear type high-strength bolt, and the bolt turns the power switch until the Torx head of the twist shear type high-strength bolt is interrupted. The electric constant torque wrench may be used to adjust the torque first, and then the main electrical corners of the bolt wrench also belong to a constant torque wrench. Its use is to adjust the rotation first, and then tighten the screws. Electric angle wrench is a special electric wrench, which is specially fixed on the bolts of the steel frame angle. It is the same as the electric wrench for torsion shear.

扭剪型電動扳手的特點：

Characteristics of torsion shear electric wrench:

（1）使用壽命長

(1) Long service life

（2）手柄和機殼材料散熱性好

(2) Handle and casing materials have good heat dissipation

（3）功率大

(3) High power

（4）耐撞擊性強

(4) Strong impact resistance

（5）手使用

(5) Hand use

以上就是為大家介紹的扭剪扳手有關的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務.

The above is a detailed introduction to the torsion - shear wrench. I hope it will help you If you have any questions, please contact us We will provide you with professional service