扭轉剪切扳手主要扭剪型高強度螺栓,它的目的是扭剪型高強度螺栓梅花頭打斷工作目標扳手頭螺栓頭,把開關可以開始工作,幾秒鐘后,螺栓梅花頭將被打破,然后拿出一個扳手將梅花頭彈出扣動扳機,或完成工作。
The torsion shear wrench is mainly used for torsion shear type high-strength bolts. Its purpose is to break the target wrench head bolt head of the torsion shear type high-strength bolt, and the switch can start working. After a few seconds, the bolt head will be broken, and then a wrench will be taken out to pop the head and pull the trigger, or complete the work.
電動扳手的影響主要是螺栓開始時,很容易使用和旨在螺栓拉主電源開關線電氣zui終扭轉剪切扳手扭剪型高強度螺栓,螺栓把電源開關的使用,直到扭剪型高強度螺栓梅花頭中斷。電動恒轉矩扳手可能zui終緊緊初,它的使用是先調整轉矩,然后螺栓扳手主要電氣角落也屬于一種恒轉矩扳手,它的使用是先調整旋轉程度,然后擰緊螺絲。電動角向扳手是一種特殊的電扳手，專門固定在鋼架角的螺栓。它和扭剪電動扳手一樣。
The main impact of an electric wrench is that it is easy to use at the beginning of the bolt and is designed to pull the main power switch wire with the bolt. The final torsion shear wrench is used to twist the shear type high-strength bolt, and the bolt is used to turn the power switch until the shear type high-strength bolt's plum blossom head is interrupted. An electric constant torque wrench may be used to tighten the bolt first, and then adjust the torque. The main electrical corner of the bolt wrench also belongs to a constant torque wrench, which is used to adjust the degree of rotation first, and then tighten the screw. Electric angle wrench is a special type of electric wrench specifically designed for fixing bolts to the corners of a steel frame. It is the same as a torsion shear electric wrench.
扭剪型電動扳手的特點：
Characteristics of torsion shear electric wrenches:
（1）使用壽命長
(1) Long service life
（2）手柄和機殼材料散熱性好
(2) Good heat dissipation of handle and casing materials
（3）功率大
(3) High power
（4）耐撞擊性強
(4) Strong impact resistance
（5）手使用
(5) Hand use
This article is organized and published by the price of torsion wrench. Have you gained some understanding of these contents? For more information, please click on: http://csbdjy.com We will have more exciting content waiting for you to check out.
