扳手加長套頭是一種用于增加扳手杠桿長度的工具，可以幫助用戶更輕松地施加力量，提高工作效率。下面是關于如何正確使用扳手加長套頭的詳細介紹。

Wrench extension insert is a tool used to increase the length of the wrench lever, which can help users apply force more easily and improve work efficiency. Below is a detailed introduction on how to use wrench extension inserts correctly.

確保選擇合適的扳手加長套頭。根據需要，選擇與扳手相匹配的加長套頭。加長套頭通常有不同的尺寸和規格，因此要確保選擇正確的套頭以適應所需的螺栓或螺母。

Make sure to choose the appropriate wrench extension insert. Choose an extended insert that matches the wrench as needed. Extended inserts usually come in different sizes and specifications, so it is important to ensure that the correct insert is selected to fit the required bolts or nuts.

接下來，將加長套頭插入扳手的頭部。確保套頭與扳手的頭部完全貼合，并且沒有松動。如果套頭沒有正確插入，可能會導致扳手在使用過程中滑動或松動，從而影響工作效果。

Next, insert the extended insert into the head of the wrench. Ensure that the insert fits perfectly with the head of the wrench and is not loose. If the insert is not inserted correctly, it may cause the wrench to slide or loosen during use, thereby affecting the working effect.

將扳手加長套頭插入螺栓或螺母。將套頭的端部對準螺栓或螺母，并確保套頭與螺栓或螺母的接觸面完全貼合。在插入過程中，要確保套頭與螺栓或螺母之間沒有松動或搖晃。

Insert the wrench extension into the bolt or nut. Align the end of the socket with the bolt or nut and ensure that the contact surface between the socket and the bolt or nut is completely snug. During the insertion process, ensure that there is no looseness or shaking between the insert and the bolt or nut.

使用扳手施加力量。將手握住扳手的手柄部分，用力旋轉扳手，使扳手加長套頭對螺栓或螺母施加力量。在施加力量時，要確保力量均勻且穩定，以避免損壞螺栓或螺母。

Use a wrench to apply force. Grasp the handle of the wrench and rotate it vigorously to apply force to the bolt or nut by extending the wrench insert. When applying force, ensure that the force is uniform and stable to avoid damaging bolts or nuts.

完成工作后，將扳手從螺栓或螺母上取下。先松開扳手，然后將扳手從螺栓或螺母上移開。在取下扳手時，要小心操作，以免意外傷到自己或其他人。

After completing the work, remove the wrench from the bolt or nut. First loosen the wrench, then remove it from the bolt or nut. Be careful when removing the wrench to avoid accidental injury to yourself or others.

總結起來，正確使用扳手加長套頭的步驟如下：

To sum up, the correct steps for using a wrench extension insert are as follows:

選擇合適的加長套頭。

Choose the appropriate extension sleeve.

將加長套頭插入扳手的頭部。

Insert the extended insert into the head of the wrench.

將套頭插入螺栓或螺母。

Insert the insert into the bolt or nut.

用力旋轉扳手施加力量。

Apply force by turning the wrench forcefully.

完成工作后，將扳手從螺栓或螺母上取下。

After completing the work, remove the wrench from the bolt or nut.