1. 選擇合適的電動扳手：根據工作需求選擇合適的扭矩范圍和電池容量。一般來說，扭矩越大，電池容量越大，也會相應提高。

1. Choose the appropriate electric wrench: Choose the appropriate torque range and battery capacity according to work requirements. Generally speaking, the greater the torque, the larger the battery capacity, and the corresponding increase in price.

2. 安裝電池：將電池插入電動扳手的電池槽中，注意正負極的方向。

2. Install the battery: Insert the battery into the battery compartment of the electric wrench, paying attention to the direction of the positive and negative poles.

3. 調整扭矩：根據工作需求，調整電動扳手的扭矩。一般來說，螺栓越緊，需要的扭矩越大。

3. Adjusting torque: Adjust the torque of the electric wrench according to work requirements. Generally speaking, the tighter the bolt, the greater the required torque.

4. 使用電動扳手：將電動扳手套在螺栓上，按下開關，電動扳手就會開始旋轉。當達到設定的扭矩時，電動扳手會自動停止。

4. Use an electric wrench: Place the electric wrench on the bolt, press the switch, and the electric wrench will start to rotate. When the set torque is reached, the electric wrench will automatically stop.

本文由扭剪電動扳手為您提供，我們的網站是：http://csbdjy.com我們將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided to you by the torsion shear electric wrench. Our website is: http://csbdjy.com We will provide you with wholehearted enthusiasm and welcome your visit!