氣動扳手和電動扳手有什么區別？
What is the difference between pneumatic wrench and electric wrench?
傳統的扳手是手動的，隨著技術的發展，逐漸有了氣動扳手和電動扳手的發明，氣動扳手和電動扳手都是扳手，但二者存
Traditional wrenches are manual. With the development of technology, pneumatic wrenches and electric wrenches have been gradually invented. Both pneumatic wrenches and electric wrenches are wrenches, but both exist
在一定的不同，氣動扳手和電動扳手的區別主要是:
There are some differences between pneumatic wrenches and electric wrenches:
1、動力來源不同，氣動扳手以空壓機提供的壓縮空氣為動力源，電動扳手則以電力為動力源。
1. The power sources are different. The compressed air provided by the air compressor is used as the power source for the pneumatic wrench, and the electric wrench is used as the power source.
2、除此之外，兩種扳手的原理也有一定的差異，在往復運轉方面，氣動扳手采用的是活塞運動，而電動扳手是通過突輪
2. In addition, there are certain differences in the principles of the two wrenches. In terms of reciprocating operation, the pneumatic wrench uses the piston movement, while the electric wrench uses the protruding wheel
轉換實現的。
Transformation.
3.還有就是使用不同，氣動扳手和電動板手，較起來，沒有發熱和超負荷故障，更話合長時間工作，不會出現發熱現
3. There are also differences in the use of pneumatic wrenches and electric spanners. Compared with each other, there is no heating and overload fault, and even more, there is no heating phenomenon when working for a long time
象;電動扳手則比較重，而且對工作環境有要求，不適合長時間工作。
Elephant; The electric wrench is relatively heavy and has requirements for the working environment, which is not suitable for long-term work.
4、經濟性方面，氣動扭矩扳千初期投資須要配置空壓管路設備，但長期使用在能源消耗與工具維護上成本較低;電動板
4. In terms of economy, the initial investment of pneumatic torque wrench needs to be equipped with air pressure pipeline equipment, but the cost of energy consumption and tool maintenance is low for long-term use; Electric board
手初期投資較低，但長期使用能源消耗較高，且工具維修、更換成本也較高。
The initial investment is low, but the long-term use of energy consumption is high, and the cost of tool maintenance and replacement is also high.
The above is the detailed introduction of the special wrench for torsion shear bolts. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://csbdjy.com
