1.沖擊電動扳手：主要是初緊螺栓的，它的操作簡單，就是對準螺栓扳動電源開關就行。
1. Impact electric wrench: mainly used for initial tightening of bolts, its operation is simple, which is to align the bolt and pull the power switch.
2.電動扭剪扳手：主要是終緊扭剪型高強螺栓的，它的使用就是對準螺栓扳動電源開關，直到把扭剪型高強螺栓的梅花頭打斷為止。
2. Electric shear wrench: mainly used for final tightening of shear type high-strength bolts. Its use is to align the bolt and pull the power switch until the plum blossom head of the shear type high-strength bolt is broken.
3.電動定扭矩扳手：既可初緊又可終緊，它的使用是先調節扭矩，再緊固螺栓。
3. Electric fixed torque wrench: It can be used for both initial and final tightening. Its use involves adjusting the torque first and then tightening the bolts.
4.電動轉角扳手：主要也屬于定扭矩扳手的一種，它的使用是先調節旋轉度數，再緊固螺栓。
4. Electric angle wrench: It mainly belongs to a type of fixed torque wrench, which is used to adjust the rotation degree first and then tighten the bolt.
5.電動角向扳手：是一種專門緊固鋼架夾角部位螺栓的電動扳手，它的使用和電動扭剪扳手原理一樣。
5. Electric angle wrench: It is a type of electric wrench specifically used to tighten bolts at the angle of the steel frame, and its use is the same as that of an electric torsion wrench.
Thank you for reading. The exciting content of this article comes from: Torsion Shear Electric Wrench. We will continue to present more exciting content for you. For more details, please click on: http://csbdjy.com
